Test
Section |
Sub
Section |
Detail |
run-log
|
log |
20:12:01: Fragmented scan: requested |
|
|
20:12:01: IP address: 24.2.250.173 |
|
|
20:12:01: Pings-of-death: requested |
|
|
20:12:01: Testing level: standard |
|
|
20:12:01: doing basic ICMP ping |
|
|
20:12:15: Running tcp SYN (half-open) portscan, source port
20, over 1-1024 plus 1026 common tcp service ports. |
|
|
20:42:16: ** Last phase failed due to a sub-command
timeout. |
|
|
20:42:16: ** test results from this phase may not be
reliable. |
|
|
20:42:16: Running tcp SYN (half-open) portscan, source port
20, over first 140 ports. |
|
|
20:42:16: using fragmented packets, which can get past some
firewalls |
|
|
20:57:17: ** Last phase failed due to a sub-command
timeout. |
|
|
20:57:17: ** test results from this phase may not be
reliable. |
|
|
20:57:17: Running quick udp portscan over port
1-16 |
|
|
20:57:54: Running tcp FULL CONNECT portscan over 1-1024 plus
services (limit 15 minutes). |
|
|
21:07:52: Attack with targa. |
|
|
21:07:52: Sending each different ping-of-death.. |
|
|
21:07:58: Done Attack with targa. |
|
|
21:07:59: Attack with sping. |
|
|
21:07:59: Done Attack with sping. |
|
|
21:08:00: Attack with fawx. |
|
|
21:08:01: Done Attack with fawx. |
|
|
21:08:02: Attack with kod. |
|
|
21:09:32: Done Attack with kod. |
 |
icmp
|
comment |
if
your security logs are good, you might have logged a
ping. |
|
result |
Your address is currently NOT
pingable. |
|
udp
|
comment |
since all UDP ports are silent, there is no
information. |
|
result |
Nothing can be determined
about your UDP ports. |
|
|
target IP is silent, or throttling speed of UDP icmp return
packets |
|
|
udp port scan would take too long! full udp scan
cancelled. |
|
smtphealth
|
result |
Cannot do requested SMTP
server health check because I dont see port 25 open |
|
nmap-syn
|
comment |
No
results from the SYN (stealth) scan) |
|
nmap-synfrag
|
comment |
fragmented packet scans are network intensive, so only first
140 ports are tried since if your firewall blocks services, it would
certainly be trying to block something in this range. |
|
nmap-tcp
|
comment |
No
results from the basic TCP scan |
|
nmap-syn
|
comment |
If
your security is good, you get an alert of a scan attempt but this
is a stealth scan, so it is difficult to detect. |
|
nmap-synfrag
|
comment |
No
results from the FRAGMENTED PACKET scan |
|
nmap-udp
|
comment |
UDP Ports. Could not complete UDP scan because within the
timeout allowed, we got no responses. It is probably you have an
effective UDP firewall. |
|
final
|
comment |
Conclusion: FINAL SCORE: 0 |
|
|
**
best result (I got no reaction at all from this
IP) |
Results
Menu:
SohoWare 